|
Item &
Description |
Additional
Pictures |
Model # |
Part No. |
New / Used |
Qty |
Product
Information |
Specs |
Price
NEW |
OUR
Price |
|
ABW / Manix TSC-1210 Reflow Oven
Product Sheet (html)
or
Product Flyer (pdf) |
Picture #1
Picture #2
Picture #3
Picture #4
Picture #5
Picture #6
Picture #7
|
TSC-1210 |
|
Used |
1 |
Dimensions: 191"L x 48"W x 75"H
Heated length: 123 inches
Pre-heat length: 52 inches
Main Heat Length: 52 inches
On-Load Length: 28 inches
Condition: Used-Good, Because this unit was used by Raytheon on a US
Govt project, the computer, keyboard, and screen have been removed and
would need replaced.
Maximum Temperature: 350 C
Temperature Accuracy: + - 1 C
Convection to IR Ratio: 95% / 5%
Mfg web links:
www.manixmfg.com
specs:
www.manixmfg.com
Above Belt Clearance: 2.75 inches
Belt Speed: 0-50 inches / min
Heater Panels: 16
Controlled Zones: 16
Vertical Zones: 8
Optional: Smart Rail - edge pin conveyor for double sided reflow
nitrogen atmosphere with water cooling
Weight: 3800 lbs
Tunnel Width: 26 inches
Max PCB Size: 22 inches Wide
Exhaust Flow: 100 CFM |
Model: 1210-N
S/N: 5077
Volts: 480
PH: 3
HZ: 60
AMP: 60
N2: 75PSI
Model: 1210-N2
S/N: 5077
Volts: 120
HZ: 60
AMP: 25
N2: 150PSI |
$56,300.00 |
$12,478.00 |
|
FPT - Federal Pacific Transformer Co. Motor Drive
Isolation Transformer Dry Type Step-Up Transformer
Product Sheet (html)
or
Product Flyer (pdf)
|
Picture #1
Picture #2
Picture #3
|
51KVA |
|
New |
2 |
KVA: 51
Rise: 150C
High Voltage: 400
Low Voltage: 460Y / 266
Weight: 480 lbs
Condition: New
HZ: 50 Phase: 3
Insulation System: 220C FH46
Ambient Temp: 40C Max
Class: AA Model: 36B
Mfg web links:
www.federalpacific.com
S/N: 26071-04, 26071-03 |
Ventilated Dry Type
Transformer
Motor Drive Isolation Transformer
Step Up Transformer |
$3,036.00 |
$1,516.00 |
|
FPT - Federal Pacific Transformer Co. Motor Drive
Isolation Transformer Dry Type Step-Up Transformer
Product Sheet (html)
or
Product Flyer (pdf)
|
Picture #1
Picture #2
Picture #3 |
20KVA |
|
New |
4 |
KVA: 20
Rise: 150C
High Voltage: 400
Low Voltage: 460Y / 266
Weight: 315 lbs
Condition: New
HZ: 50 Phase: 3
Insulation System: 220C FH46
Ambient Temp: 40C Max
Class: AA Model: 36B
Mfg web links:
www.federalpacific.com
S/N: 26246-03, 26246-02, 26246-01, 26068 |
Ventilated Dry Type
Transformer
Motor Drive Isolation Transformer
Step Up Transformer
|
$1,948.00 |
$974.00 |
|
FPT - Federal Pacific Transformer Co. Motor Drive
Isolation Transformer Dry Type
Product Sheet (html)
or
Product Flyer (pdf)
|
Picture #1
Picture #2
Picture #3 |
220KVA |
|
New |
3
|
KVA: 220
Rise: 150C
High Voltage: 400
Low Voltage: 460Y / 266
Weight: 1450 lbs
Condition: New
HZ: 50
Phase: 3
Insulation System: 220C FH46
Ambient Temp: 40C Max
Class: AA
Model: 36B
Mfg web links:
www.federalpacific.com
S/N: 26070-03, 26070-02, 26070-01 |
Ventilated Dry Type Transformer
Motor Drive Isolation Transformer |
$9,107.00 |
$4,554.00 |
|
DataMax I4308
Product Sheet
|
Picture #1
Picture #2
Picture #3
Picture #4 |
DMX-I-4308 |
R23-00-18000007 |
Used |
3 |
Model: R23-00-18000007
Print Speed: 8 IPS
Resolution: 300 DPI
Print Type: Direct Thermal and Thermal Transfer
Interface: Parallel and Serial
Print Width: 4.16"
DRAM: 16MB
Flash: 2MB
Volts: 115/230
HZ: 50/60
Amps: 3.0/1.5
Weight: 36 lbs
Dimensions: 17Dx13Wx12D
Condition: Very Good
Mfg web links:
-Specs:
www.barcodediscount.com
- Info:
www.datamaxcorp.com
- Software:
www.labelident.comThese
printers were manufactured in April of 2001. A new print head from
Datamax is warranted for 12 months or 1,000,000 inches of print, with an
expected print life of 2-3 million inches of print. The print heads on
these units have 150,000 - 400,000 inches of print on their absolute
media counters. These printers were under service contract and are in
very good shape. All were in use right up until time of removal. |
The Datamax I-Class printer is the most
comprehensive, cost-effective industrial label printing solution
available in the thermal printer marketplace today.
I-Class accessories are field installable and most enhancement options
are simply plugged into the printer's rear card cage. All I-Class
printers feature the same innovative design incorporating scalability
into a rugged structure that ultimately creates a versatile, powerful
label printing tool. With the most standard memory and a vast number of
available configurations, the I-Class is the printer of choice for
large, multinational operations. However, the remarkably sophisticated
design and its ease-of-use make the I-Class the product of choice among
facilities of all sizes in all parts of the world.
|
$2,095.00 |
$698.00 |
|
Sun Microsystems Ultra ENTERPRISE 6000 Server
Product Sheet (html)
or
Product Flyer (pdf)
|
Picture #1
Picture #2
Picture #3
Picture #4
Picture #5
Picture #6
|
6000 |
|
Used |
1 |
Dimensions: 29W x 38D x 55H
Condition: Used / Very Good
S/N: 642F09E6
UltraSPARC processors: 16 x 2.1 GB
Drives: CD and DAT
Weight: 1020 |
Removed from service at the National Institute for
Occupational Safety and Health - Dept of Health and Human Services |
$266,609.00 |
$3,640.00 |
){kind=link}
){kind=link}
){kind=link}
){kind=link}
){kind=link}
){kind=link}
){kind=link}
){kind=link}
){kind=link}
){kind=link}
){kind=link}
){kind=link}
){kind=link}
){kind=link}
){kind=link}
){kind=link}
){kind=link}
){kind=link}
){kind=link}
){kind=link}
){kind=link}
){kind=link}
){kind=link}
){kind=link}
){kind=link}
){kind=link}